PD140 Rhino Pneumatic Heavy Duty Post Driver w/ Master Chuck

Introducing Rhino Pneumatic Heavy Duty Post Driver!

Often referred to as the guard rail driver, the PD-140 is a power performer and fully capable of driving posts that competiton simply cannot. No other system strikes the balance between investment and return as does the PD-140. The PD-140 is ideally suited to drive guard rail posts, heavy line posts, corner posts, gate posts, baseball backstops, dock piles, pin piles, foundation piles, wood posts, concrete posts, heavy gauge aluminum posts, well points, well casing and fence posts from 2” to 4” in diameter.

Features Include:

• Equipped with 4 1/4"" (107.9 mm) I.D. Master Chuck
• Air Consumption 64 CFM @ 100psi
• Will drive maximum post size 4 1/4" diameter
• 140 pounds
• NOTE:  Drive caps are necessary to minimize damage to posts being driven
• This unit will drive C Post, Super C Post, Well Points (Sand Points). Other sizes and applications may require adapters and / or drive caps.
• Optional throttle valve kit with 5' whip hose is part number 600000

Please specify what you are driving for accurate recommendation of Chuck Adapters and / or Drive Caps

Other models available, please call 800-769-3741 for details

NOTE:  One photo shown with optional valve and whip hose