Turbo Turf 150 Gallon Hydro Seeding Systems

The HS-150, is a 150 Gallon, skid type hydroseeding system.  It will seed 2000 square feet per load. It is equipped with an 6.5 H.P. Honda engine that is directly coupled to a 2" X 2" high volume centrifugal pump. The unit comes with 100' of 1 1/4" discharge hose, a gun and three nozzles (1 wide hydroseeding nozzle, 1 straight distance nozzle, and 1 trim nozzle). The empty weight of the unit is 330 pounds. the loaded weight is 1530 pounds. the physical dimensions are 41"W x 60"L x 44"H.  The size of the skid is 26" x 72".  This unit can easily be transported in the pack of a pick up truck or on a trailer.

The HS-150 is ideal for a golf course for repairing wear along cart paths, and for repair projects, for a cemetery, for a school, for construction repairs such as someone installing irrigation systems or water lines, for installing a new lawn in areas with smaller lawns and for lawn repair and renovation. It is capable of handling much larger jobs, but if the average job is larger, a bigger machine should be considered. Material is applied at approximately 30 G.P.M. Time to spray a complete tank is about 4-5 minutes. Mixing time is 2-5 minutes depending on material. This unit comes with 100' of discharge hose. It will handle an extra 50' of hose. The spray distance with the straight nozzle is approximately 40'. The spray distance with an Area/Volume kit (2" cannon) is 60'.

Typically materials used in one load would be 3/4 - 1 bale of hydro seeding mulch, the appropriate amount of seed for 2000 sq. ft. (any seed will work in hydroseeding), and the appropriate fertilizer for 2000 square feet (liquid, water soluble, or granular).

Like all TURBO TURF systems the HS-150 comes equipped with a long life poly tank that can never rust, the ability to mix partial loads, a simple but powerful design with few moving parts, continuous agitation, and the ability to control the flow at the gun without making adjustments at the unit. Prices quoted are a complete machine ready to operate. Pull type units are intended for off road use.

Call 800-769-3741 or e-mail sales@powerequipmentwarehouse.com for customized pricing and shipping details