Live2Support.com
 
Search
Filters
800-769-3741
Close

Turbo Turf

Turbo Turf builds the best jet agitated systems on the market in sizes from 50 gallon to 1600 gallon and high performance mechanically agitated units in 500, 750 and 1000 gallon sizes.  Turbo Turf systems can be used to plant most any grass, wild flowers and crown vetch and other ground covers. Any fertilizer can be used, including granular fertilizer. Most any hydro mulch or tackifer. Turbo Turf can even handle products that make a virtual spray on erosion control blanket to help solve the toughest erosion control problems.

Hydroseeding is a great way to grow grass. The seed, fertilizer, hydromulch, tackifier and water are all applied in one fast easy step. The use of messy straw is eliminated. Trimming is quick and easy. Problems with difficult to seed areas such as hill sides, and narrow areas between the sidewalk and the curb are a breeze.  With a Turbo Turf Hydro Seeding System. Labor costs are reduced. One man can easily run most Turbo Turf Systems.

Hydro Seeding System Options are available.  Please call 800-769-3741 for pricing and details.

  • Honda engine options

  • Hose and discharge options

  • Filling options

  • Ice Control Options

Turbo Turf has the right machine for you: 

  • Hydroseeders

  • Straw Blowers

  • Watering Units

  • Compost Tea Spreaders

  • Turf Sprayers

  • Tree Sprayers

  • Ice Control Sprayers

If you don't see it, call us!

View as
Sort by
Display per page

HS-100-P 100 GAL PULL HYDRO SEEDER

Call for details
The HS-100-P, is a 100 Gallon, pull type hydroseeding system. It has a clevis hitch and two 20 x 10.0 x 8 tires on demountable hubs. It will seed 1300 square feet per load. It is equipped with a 4  H. P. Honda engine that is directly coupled to a 2" X 2" high volume centrifugal pump. The unit comes with 100' of 1 1/4" discharge hose, a gun and three nozzles ( 1 wide hydroseeding nozzle, 1 straight distance nozzle, and 1 trim nozzle). The empty weight of the unit is 240 pounds. the loaded weight is 1050 pounds. the physical dimensions are 27"W x 56"L x 43"H. This unit is easily pulled by a compact tractor, A.T.V. or a utility vehicle such as the John Deere Gator. The HS-100-P is ideal for a golf course for repairing wear along cart paths, and for repair projects, for a cemetery, for a school, for construction repairs such as someone installing irrigation systems or water lines, for installing a new lawn in areas with smaller lawns and for lawn repair and renovation . It is capable of handling much larger jobs, but if the average job is larger, a bigger machine should be considered. Material is applied at approximately 30 G.P.M. Time to spray a complete tank is about 3-4 minutes. Mixing time is 2-5 minutes depending on material. This unit comes with 100' of discharge hose. It will handle an extra 50' of hose. The spray distance with the straight nozzle is approximately 40'. The spray distance with an Area/Volume kit (2" cannon) is 60'. Typically materials used in one load would be a half bale of hydro seeding mulch, the appropriate amount of seed for 1300 sq. ft. (any seed will work in hydroseeding), and the appropriate fertilizer for 1300 square feet (liquid, water soluble, or granular). Like all TURBO TURF systems the HS-100-P comes equipped with a long life poly tank that can never rust, the ability to mix partial loads, a simple but powerful design with few moving parts, continuous agitation, and the ability to control the flow at the gun without making adjustments at the unit. Prices quoted are a complete machine ready to operate. Pull type units are intended for off road use.

HS-150-P PULL TYPE 150 GAL HYDRO SEEDER

Call for details
The HS-150-P, is a 150 Gallon, pull type hydroseeding system. It has a clevis hitch (pin hitch) and two 20 x 10.0 x 8 tires on demountable hubs. It will seed 2000 square feet per load. It is equipped with a 6.5H.P. Honda engine that is directly coupled to a 2" X 2" high volume centrifugal pump. The unit comes with 100' of 1 1/4" discharge hose, A gun and three nozzles (1 wide hydroseeding nozzle, 1 straight distance nozzle, and 1 trim nozzle). The empty weight of the unit is 380 pounds. the loaded weight is 1580 pounds. the physical dimensions are 41"W x 84"L x 52"H. This unit is easily pulled by a compact tractor, ATV or a utility vehicle such as the John Deere Gator. The HS-150-P is ideal for a golf course for repairing wear along cart paths, and for repair projects, for a cemetery, for a school, for construction repairs such as someone installing irrigation systems or water lines, for installing a new lawn in areas with smaller lawns and for lawn repair and renovation . It is capable of handling much larger jobs, but if the average job is larger, a bigger machine should be considered. Material is applied at approximately 30 G.P.M. Time to spray a complete tank is about 4-5 minutes. Mixing time is 2-5 minutes depending on material. This unit comes with 100' of discharge hose. It will handle an extra 50' of hose. The spray distance with the straight nozzle is approximately 40'. The spray distance with an Area/Volume kit (2" cannon) is 60'. Typically materials used in one load would be 3/4 - 1 bale of hydro seeding mulch, the appropriate amount of seed for 2000 sq. ft. (any seed will work in hydroseeding), and the appropriate fertilizer for 2000 square feet (liquid, water soluble, or granular). Like all TURBO TURF systems the HS-150-P comes equipped with a long life poly tank that can never rust, the ability to mix partial loads, a simple but powerful design with few moving parts, continuous agitation, and the ability to control the flow at the gun without making adjustments at the unit. Prices quoted are a complete machine ready to operate. Pull type units are intended for off road use.