Toro GrandStand 60-inch (Model 72513)
The Toro GrandStand 60-inch (Model 72513) is a heavy-duty, commercial-grade stand-on mower built to deliver exceptional cutting performance, speed, and reliability for large properties and professional lawn care operations. Equipped with a 25-horsepower, 747cc EFI (Electronic Fuel Injection) engine, it provides powerful, fuel-efficient performance and smooth operation under varying mowing conditions. Its 60-inch TURBO FORCE® cutting deck covers wide swaths of grass in each pass, making it ideal for large properties ranging from 4 to 12 acres or more, allowing you to complete jobs quickly without sacrificing cut quality. The stand-on design improves maneuverability, visibility, and comfort, while the folding operator platform allows for easy storage and trailer transport. With a 10.5-gallon fuel capacity and a top speed of around 10 mph, you can mow for long periods with minimal downtime, making this mower a productivity powerhouse for landscapers and estate owners alike. To achieve the best efficiency, always ensure the mower is properly maintained: keep the blades sharp for a clean, even cut, set the deck height appropriately for your grass type (usually between 2.5 and 3.5 inches for most lawns), and mow in smooth, consistent rows to minimize overlap and reduce time spent on each job. Before mowing, check the oil, air filter, and tire pressure, and clear the area of debris to prevent damage to the deck or blades. During operation, maintain a steady speed suited to grass density, slow down slightly in tall or wet grass to prevent bogging and periodically inspect the deck for grass buildup, which can affect airflow and cutting quality. For easy troubleshooting, if the mower won’t start, inspect the battery connections, spark plug, air filter, and fuel quality; for uneven cuts, check that the blades are sharp and the deck is level; and if you notice a loss of power, clean the filters, ensure the EFI system is functioning properly, and raise the deck to reduce engine load. After mowing, clean the underside of the deck, inspect belts and blades, and store the mower in a dry, covered area. With regular maintenance and proper operation, the Toro GrandStand 72513 delivers professional-grade performance, durability, and efficiency, making it one of the most effective options for tackling expansive lawns and demanding mowing schedules.
Yard-size / Capability overview
This model is a commercial-stand-on mower, built for larger properties. Some key specs:
- Deck width: 60 inches (152 cm).
- Engine: 25 hp, 747 cc EFI (electronic fuel injection) engine.
- Forward transport speed: up to ~10 mph (16 kph).
- Cut height range: 1.5″ to 5.0″ (3.8 cm to 12.7 cm).
- Fuel tank: 10.5 gallons (39.7 L) so fewer fill‐ups during large jobs.
- Features: foldable operator platform (so it can convert to walk-behind mode), good visibility, commercial deck design (TURBO FORCE® deck) for “long, tough days on the job.”
What yard size is appropriate?
Because of its 60″ deck and “commercial” design, this mower is best suited for large lots, estates, commercial properties, or landscaping businesses. For a typical suburban yard of ½ to 2 acres, it's probably over-sized (both cost‐wise and physically). But if you have 3 to 10 acres (or more) with big open lawn areas and need to finish quickly, this machine fits very well. Also consider:
- Are there many obstacles, tight spaces, tree trunks, flower beds? With a 60″ deck you’ll want enough clearance and room to turn.
- Do you want to finish in a few passes? With 60″ width you’ll cover more ground per pass.
- Transport and storage; this is a heavy, large machine (weight spec ~963 lbs) so you’ll need room and a suitable trailer/storage.
In short: if your property has large expanses of lawn and you either maintain it regularly or are doing commercial‐level work, the 72513 is highly capable.
How to use it for best efficiency
To get the most out of this mower (fast, clean cut, minimal downtime), follow these usage tips:
Pre‐mow preparation
- Sharpen or inspect the blades – With a 60″ deck, dull blades will reduce cut quality and slow your job.
- Check deck height – Set your deck to the proper height for your grass type. For most cool-season grasses (common in Ohio) you might mow around 2.5″ to 3.5″, but with the deck you could also go low (1.5″) in certain conditions.
- Fuel / oil / air filter check – With a commercial engine (EFI 25hp) you want the engine to breathe well, so ensure air filter is clean, oil level correct, fuel fresh.
- Clear the mowing area – Remove big sticks, rocks, etc so you’re not hitting debris that could slow you or damage deck.
- Plan your mowing pattern – With a wider deck, planning matters more: start along the longest dimension, mow in rows, turning only at the ends, overlapping slightly to avoid missed strips.
During mowing
- Maintain a steady forward speed appropriate for grass density and conditions. While you can go fast (10 mph transport speed), for actual cutting you may need to slow in heavy/thick grass to avoid bogging the engine or getting a poor finish.
- Use the twin lever controls smoothly (since this is a stand-on with twin levers) avoid sharp jerky movements that slow you down or wear components.
- If mowing slopes or uneven ground, the wide stance and good deck design help, but still approach carefully.
- Keep the deck clean. Grass build-up underneath reduces cutting efficiency. Periodically when you stop, glance under the deck and clear if needed (especially when grass is wet or heavy).
- Adjust deck baffle if applicable: This model has an adjustable discharge-baffle (tools-free) allowing you to fine-tune performance (open for faster mow in lighter conditions; closed for finer mulch/discharge in heavier conditions).
Post‐mow / maintenance
- Clean the deck and underside after use so clippings and moisture don’t harm performance or cause rust.
- Check blade wear/damage; because a 60″ commercial deck takes more wear.
- Periodic servicing: with EFI engine and commercial hydraulic drive, check fluid changes, spindles, belts, etc. according to manual.
- Store properly: Cover, keep fuel stabilized if storing for a season, protect from weather.
Easy troubleshooting tips
Here are common issues and quick fixes (for a machine like this):
Problem: Mower doesn’t start or hard to start
Check list:
- Fuel level and quality (old or stale fuel can cause starting issues)
- Battery / starting circuit (for electric start)
- Air filter clogged → ensure clean
- Spark plug: inspect gap, fouled, replace if needed
- Safety interlocks: Many commercial stand-ons have deck clutch switch, platform switch, operator presence switch. Ensure those are functioning and engaged correctly.
Problem: Poor cut quality / uneven mowing
Check:
- Blade condition: Dull, bent or damaged blades will give a poor finish.
- Deck level: The deck must be level side‐to‐side and front‐to‐back.
- Proper height: If you set too low or too high for conditions, finish suffers.
- Grass is too tall or wet: mowing very tall or wet grass can cause clumping or poor discharge.
- Under‐deck buildup of clippings: Reduce airflow and performance.
- Belt or spindle issues: If blades are not spinning at full speed, or there’s wobble, check spindles/bearings.
Problem: Mower bogs down or loses power
Check:
- Engine air intake blocked (dirty air filter)
- Fuel supply or filter issue
- Deck height too low or you’re cutting too aggressively in thick grass; slow down, raise deck
- Hydraulic drive slipping (if you feel drive power is weak) – check drive system fluid/condition
- Clean out clippings in deck/under deck so blower effect is maintained.
Problem: Drive / movement issues
- For twin-lever stand-on, uneven response may be due to one side dragging: check lever linkage, drive motors.
- Hydraulic fluid level & condition.
- Tire pressure/wear: drive tires should have correct pressure and no damage.
- Avoid bogging front casters or dragging; proper operation technique is important: turn gradually, don’t skid the front wheels repeatedly (skidding causes extra wear).
