Toro Power Max e26 (model 39926) Heavy-Duty 60V MAX Two-Stage Cordless Snow Blower

Toro Power Max e26 (model 39926) is a heavy-duty 60V MAX two-stage cordless snow blower

The Toro Power Max e26 (model 39926) is a heavy-duty 60V MAX two-stage cordless snow blower built for homeowners who want gas performance with the quiet, low-maintenance convenience of battery power. Equipped with two 7.5Ah batteries and an efficient brushless motor, it clears up to 30 car spaces in 10 inches of snow on a single charge, throwing snow as far as 45 feet through its all-steel chute with Quick Stick® control for fast direction changes. With a 26-inch clearing width, 20-inch intake height, and self-propelled variable-speed drive (six forward and two reverse gears), the 39926 is ideal for medium to large paved or gravel driveways, and its Anti-Clogging System keeps snow moving freely even in heavier, wetter conditions. The rugged steel auger housing, 15-inch tires, and no-shear-pin design make it durable enough for repeated winter use. For best efficiency, start with fully charged batteries and clear snow early before it compacts; take slower, overlapping passes during deeper snowfalls, and avoid overloading the auger by trying to clear maximum depth in a single push. Use the chute control to direct snow away from cleared areas and slightly raise the scraper bar when working on gravel to prevent picking up rocks. After each use, remove ice and snow buildup, dry the machine, and store the batteries indoors in a cool, dry place. If performance drops, such as weak throwing distance, loss of traction, or short runtime, check for a clogged chute, worn drive components, or cold-depleted batteries, and warm or swap them as needed. Clean, inspect, and tighten all hardware regularly to prevent vibration or uneven clearing. With proper care and efficient use, the Toro 39926 delivers powerful, consistent snow-clearing performance for most residential driveways, combining the strength of a gas blower with the convenience and reliability of a modern cordless system.

Key Specifications & Features

• Clearing width: 26 in (66 cm)
• Intake / height capacity: 20 in (50 cm)
• Throw / discharge distance: up to 45 ft (13.7 m)
• Auger diameter: ~ 11 in (28 cm)
• Power: Brushless DC motor, battery powered (60V system)
• Batteries included: 2 × 7.5 Ah packs
• Charge time: ~180 minutes (3 hours)
• Runtime: up to ~70 minutes under favorable conditions
• Drive: Self-propelled, variable speed (6 forward, 2 reverse)
• Wheels: 15" × 4" tires
• Weight: ~186 lb (84.4 kg)
• Chute & control: Steel chute, Quick Stick® chute control for direction/deflector adjustment
• Anti-Clogging System (ACS): helps reduce clogging intake under heavier snow conditions
• No shear pins required: uses hardened gears and bolts instead of replaceable shear pins
• Surfaces supported: designed for concrete, asphalt, gravel driveways

Driveway / Performance Expectations & Capability

Given those specs, here’s how it should perform on a typical residential driveway:

• Because of its 26" clearing width, each pass clears more area than narrower blowers, which improves throughput over longer driveways.
• The intake depth of 20" means it can theoretically handle deeper snow, but in practice, performance drops with snow heavier or deeper than ~10–12 in (due to load, clogging, battery drain).
• The 45 ft throw distance helps throw snow far enough away to prevent re-depositing on cleared areas.
• In moderate snow (say 4–8 in), one full battery charge should clear a typical single- or double-car driveway, though in deeper or heavier snow you may need to change batteries or make multiple rounds.
• The manufacturer claims it “clears up to 30 car spaces in up to 10″ of snow with the two included 7.5 Ah batteries.”
• On gravel driveways, care must be taken not to drag the scraper bar too low (to avoid picking up stones).
• Because it’s self-propelled with variable speed, it can handle slight grades/slopes, but very steep inclines may challenge traction.

So, for typical driveways (single or double width, moderate length), the 39926 is quite capable best when you break snow clearing into manageable passes and don’t overburden the battery by too deep a cut in one go.

How to Use It for Best Efficiency & Longevity

To maximize performance, avoid issues, and get longer life from your unit:

Pre-Use & Setup

1. Fully charge batteries beforehand — starting with a full charge gives you the maximum usable runtime.
2. Inspect machine — check auger, chute, tires, drive train, fasteners. Remove any debris or objects.
3. Set proper skid shoe / scraper bar height — so it clears snow close to the surface without scraping the pavement or dragging on gravel.
4. Clear obstacles — rocks, sticks, ice chunks, etc., should be cleared before you begin to avoid damaging the auger or impeller.

During Operation

1. Don’t try to remove full depth in one pass — in deeper snow, take first pass removing ½ or ⅔ of the snow, then follow with a second pass to finish.
2. Control your forward speed — go at a steady pace that doesn’t overwhelm the auger/chute system. If the auger starts to bog, slow down or reduce depth.
3. Use Quick Stick chute control smartly — direct the snow away from already cleared lanes or your walking path. Avoid blowing snow back onto cleared areas.
4. Overlap passes slightly to avoid unplowed strips between passes.
5. Monitor battery status — when voltage falls or performance weakens, consider switching batteries.
6. Use a third battery if needed (if the model supports a third battery port) in heavy snow or large driveways, if available. (Many descriptions mention 3 battery ports)
7. Keep the chute and impeller clear — if snow or ice blocks the chute, stop and clear before resuming.
8. Clear snow early / more often — clearing while snow is fresh and hasn’t compacted or frozen hard is easier than waiting until it’s piled up.

After Use & Maintenance

1. Remove snow and ice buildup from housing, chute, and controls to prevent damage and freezing.
2. Dry components where possible and apply a light protective spray or lubricant in pivot / chute areas (if recommended by manual).
3. Inspect fasteners, belts, gears, and drive components periodically and tighten or replace as needed.
4. Store batteries in recommended temperature range (cool, dry but not freezing) to preserve battery health.
5. At season’s end, do a full inspection, clean thoroughly, and address any wear or damage so it’s ready for next season.

Troubleshooting & Common Issues

Here are likely problems you may run into, along with diagnostic steps and remedies:

If those fixes don’t restore performance, consult the official Toro 39926 / Power Max e26 owner’s manual and contact an authorized Toro service provider for diagnostics or parts replacement.

GUARANTEE YOURS TODAY WITH FREE LAYAWAY!