Toro 38755 the Power Clear® 821 R-C

Toro 38755 the Power Clear® 821 R-C

The Toro 38755, also known as the Power Clear® 821 R-C, is a 21-inch single-stage gas snow blower designed primarily for residential use on small to medium-sized driveways and sidewalks. Equipped with a Toro Premium 252cc OHV 4-cycle engine, it is capable of handling snow depths up to 9 inches and can throw snow distances up to 35 feet, making it ideal for average snowfalls. Its Power Propel® self-propel system reduces the physical effort required to push the machine, while the 210° chute rotation allows precise control over snow direction for more efficient clearing. For best performance, users should employ fresh, non-ethanol gasoline, regularly check the auger and belts for wear, and maintain the spark plug and fuel lines. Common troubleshooting involves clearing auger or chute blockages, inspecting belts and rotors, and adjusting skid shoes to ensure even clearing. Efficiency is maximized by removing snow promptly to prevent accumulation, performing routine maintenance, and keeping the machine clean after each use to prevent ice buildup. By following these practices, the Toro 38755 can reliably clear small to medium residential areas quickly and with minimal strain, making it a practical and dependable option for homeowners looking to manage winter snow efficiently.

Yard Size Capabilities

• Clearing Width: 21 inches (53 cm)
• Engine: Toro Premium 252cc OHV 4-cycle
• Throw Distance: Up to 35 feet (10.7 m)
• Ideal Snow Depth: Up to 9 inches (22 cm)
• Recommended Fuel: Fresh gasoline (non-ethanol preferred)
• Drive System: Power Propel® self-propelled
• Chute Control: 210° rotation with chute-mounted handle
• Weight: Approximately 90 lbs. (40.8 kg)
• Storage Dimensions: 33" x 21" x 34" (84 cm x 54 cm x 87 cm)

This model is suitable for clearing paved driveways and sidewalks of average to light snow accumulation.

Troubleshooting Tips

1. Snow Not Being Thrown

• Check for Clogs: Inspect the auger and chute for any blockages.
• Inspect the Auger Belt: Ensure the belt is intact and properly tensioned.
• Examine the Rotor: Verify that the rotor is not damaged and is spinning freely.

2. Difficulty Starting

• Use Fresh Fuel: Always use fresh gasoline, preferably non-ethanol, to prevent starting issues.
• Prime Correctly: Ensure the primer bulb is firm and not cracked; replace if necessary.
• Check Spark Plug: Inspect and clean or replace the spark plug if needed.
• Inspect Fuel Lines: Check for blockages or cracks that could impede fuel flow.

3. Uneven Snow Clearing

• Adjust Skid Shoes: Ensure the skid shoes are set to the appropriate height for your surface.
• Check Auger Blades: Inspect the Auger Blades for wear and replace if necessary.

Best Practices for Efficiency

• Regular Maintenance: Perform routine checks on the auger, belts, and spark plug to ensure optimal performance.
• Proper Storage: After each use, clean the snow blower to remove any snow and ice buildup, which can affect performance.
• Fuel Management: Use fresh fuel and add a fuel stabilizer to prevent issues during startup.
• Safe Operation: Always operate the snow blower on stable, level ground and avoid overloading it with heavy, wet snow.